Urban Civilisation and fast-growing cities are forcing us to construct Hi-rise residential and commercial buildings and complexes. In this changing scenario, the garbage collection from every floor and its disposal have become a tedious job.Garbage chutes are the means to overcome the above problem with ease & utmost hygiene.
ADVANTAGES OF GARBAGE CHUTES FOR BUILDINGS:
- Facilitates total garbage collection for buildings at one single point
- Garbage disposal with ease & utmost hygiene
- Reduces Power consumption
- Segregated garbage collection.
GARBAGE CHUTES SALIENT FEATURES
- Available in various materials viz… SS304, SS430, G I & Aluminised steel
- High-pressure disinfectant spraying, solid profile, wide angle, adjustable cleaning sprinklers at every intake level.
- Cleaning operation by the control panel in the garbage room
- Exhaust system to give a minimum of 20-40 air changes/hr
- UL labeled 90min fire rated hoppers (UL10B Std)
- Discharge end fire cut off the door.
- Garbage collection in bins.
- Available in different diameters & Hopper sizes (Dia 450mm / Dia 600mm Dia 750mm / Dia 900mm etc.. )
- Standard response fire sprinklers of 68 Deg C are provided inside the chute
DIFFERENT TYPES OF GARBAGE CHUTES ARE OFFERED:
- Standard Manual
- Standard with Inter Locking
- Bi Sorter
- Tri Sorter
- Quadra Sorter
- Interlocking with the access control system
- Pneumatically operated chute hopper for all above types
Material of Construction:
Manufactured from stainless steel SS 430 / SS 304 grade having a thickness of 1.2 / 1.5 / 2 mm depending upon the diameter of the chute. The use of Plastic / Fibre chutes possess a risk of fire hazards and is hence not allowed as per BS/NFPA codes. Stainless steel is corrosion resistant hence giving maximum durability.
Intake Door
Intake doors are bottom-hinged, Self-closing hopper-type doors. The door is fitted with a gas piston which ensures a smooth and silent closing of the door. Door opening has side checks to avoid spillage.
Sanitation System
It is an automated cleaning system that cleans the entire chute from within only at the press of a button. It consists of a sanitation unit at terrace level with a liquid disinfectant storage tank operated by an automated control panel in the garbage room. Cleaning sprinklers are provided at the intake opening. These cleaning sprinklers are 120-degree, full cone, and solid profile high-pressure water jet sprinklers which ensure proper cleaning of the surface from within. Cleaning sprinklers are specially designed to maintain constant pressure on lower as well as higher floors. The chute is cleaned with a mixture of plain water and disinfectant solution.
Auto Closing Fire Door
It is installed at bottom of the chute in the garbage room. In case of fire in garbage room as the temperature cross, 79-degree fusible link melts closing the fire door. The fire door blocks the path of fire preventing heat transfer.
Air Vent
It removes the foul smell and harmful gas generated from garbage It is provided at roof level and operated by a timer-based control panel to save power. Vent diameter is reduced at the top and gives 20/40 air changes per minute.
Fire Sprinkler
It is installed on the top and bottom floors and on every alternate floor. In case of fire as the temperature rises beyond 68-degree celsius fire sprinklers open and releases water. Installation Requirements:
Our Garbage Chute can be easily installed in any duct, common lobby, landing, staircase, mid landing, utility duct, dry balcony or kitchen
| Chute Diameter | Type of Building | Intake Door Size (Bottom Hinged) |
Duct Size/Slab Opening |
| 450 mm | Residential | 300 mm x 375 mm | 600 mm x 600 mm |
| 600 mm | Residential / Commercial | 375 mm x 450 mm 450 mm x 450 mm |
750 mm x 750 mm |
| 750 mm | Commercial | 525 mm x 525 mm 600 mm x 600 mm |
900 mm x 900 mm |
Garbage Room Size (in Mtrs.)
| Standard Garbage Chute | 1.5 Width X 1.5 Length X 2.4 Height |
| Segregated Garbage Chute | 2 Width X 1.5 Length X 2.4 Height |